Grass paver systems are made from recycled plastics containing large percentages of post-consumer content. In addition, they often use materials that are not environmentally-friendly, such as the petroleum products, and to bind together the asphalt. Building such a system is expensive, and the water must be treated before it can be used for other purposes.Ĭoncrete and asphalt require large amounts of energy to produce and install. With concrete and asphalt surfaces, the water and any pollutants carried with it, must be diverted into a drain system that connects to a municipal wastewater system or a retention pond. Not only do grass pavers reduce flooding and erosion near the parking area, but they also allows rainwater to return to the local aquifers naturally, filtering out pollutants left on the surface. In concrete or asphalt, the pooling can cause it to flood, so a merging drainage system must be installed to help prevent flooding. During bad weather, the water soaks through the surface, rather than pooling, in low-lying areas unlike it would on concrete or asphalt. Since a grass paver system uses soil or loose fill materials, it is permeable to rain water. Alternatively, rolls of sod can be laid over the empty grid and pressed into place Once the soil has been compacted into the grid, it can be seeded with the preferred variety of grass. Once the entire grid is laid down and trimmed to fit around obstacles, the grids can be filled with soil by hand or with heavy equipment, such as a backhoe. They can be easily carried by one person and cover a large area quickly. They also feature a built-in interlock system to secure them to adjacent grids. The grass paver grids come in large sections – up to two feet square – which are lightweight. The grass paver system is then installed over the top of the subsurface. Then rock, gravel or limestone are brought in to create a strong, permeable subsurface layer. The grass paver system is much easier to install, and requires much less labor and equipment.įor a permanent installation, the land is cleared of vegetation, graded to create a level and flat surface. This allows them to be driven on by vehicles, including large trucks, without damaging the grass or deforming the soil.Ī grass paver system can provide a durable surface that is nearly as strong as concrete or asphalt surfaces, while being much more attractive – especially in rural or suburban areas.Īsphalt or concrete surfaces require expensive specialty equipment and plenty of labor for the installation process. Even when they are empty, they have up to a 6800 PSI compression strength. This gives the pavers an incredibly high compression strength, up to 8000 PSI, when filled. Asphalt or concrete parking surfaces can look unattractive, and if they are only used temporarily, they are a waste of space that could be used to grow natural grass.Ī grass paver system uses interlocking grids that distribute the weight of vehicles and other loads evenly over the underlying surface. Parking spots for recreational vehicles or camping trailers.Ī grass paver creates a visually appealing parking area or driveway that blends in with the surrounding lawn and other natural features, while providing a strong surface that protects the underlying grass.Roadways for golf carts and off-road vehicles and.Fire lanes for commercial buildings that discourage parking by resembling grassy areas.Auxiliary parking for fairgrounds, concert halls and other locations that looks like a lawn when it is not used.A secondary driveway leading to a garage or utility building.Extra parking spots for family and friends on special occasions.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |